Table of Contents
Advertisement
WMK-005
3.
Separate the upper assembly from the projector mounting bracket by slightly loosening the two
tension knurl knobs to create free play between the bracket tri-lock assembly and the upper section
tri-lock assembly points (Figure 2A and Figure 2B).
4.
Loosen the security screw knurl knob far enough to allow the two parts to be rotated 180° apart and
separate (Figure 2C).
A
Installation Manual
Tension
Knobs
Rotate 180°
To unlock
Tri-Lock
Opening
Figure 2. Mount Preparation
B
Upper
Assembly
Safety
Knob
C
Page 9
Advertisement
Table of Contents
