Rear Camera Operation - (Optional) - Dual XVM1000Ui Installation & Owner's Manual

XVM1000Ui
Front 3.5mm Aux Input & Rear RCA A/V Input
Auxiliary Input

Rear Camera Operation - (Optional)

Using Rear Camera
Auto Selection
Dual iPlug P1 Smart App Remote Control
Use the Dual iPlug P1 Smart App Remote Control on an
Apple or Android smartphone to control the receiver via
Bluetooth.
Change the mode, station, song, volume, and settings
directly from your smartphone without being in the
receiver's line-of-sight.
Download the Dual iPlug P1 Smart App Remote Control
from Apple App Store or Google Play Store and install it
on your smartphone or tablet (QR code download link on
the right).
21
OPERATION
Connect an optional audio source into the 3.5mm (front panel) input.
Select auxiliary input from the Main Menu to listen to audio.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Manual selection - Touch CAMERA icon from the Main Menu or from any
operational mode (when enabled) to select camera mode.
on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle's reverse
light.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry.
Note: The external video output is not active when using the rear camera input.
Touch the top left area