Tft Monitor Operation; Rear Camera Mode; Screen Adjustment; Screen Adjustment Procedure - Dual AXV830 Installation & Owner's Manual

TFT Monitor Operation

Rear Camera Mode

When the vehicle is placed in "Reverse", and a rear camera is connected to the unit, the monitor
will automatically switch to the camera input source. Please make sure the reverse wire is
connected.

Screen Adjustment

"COLOR" "CONTRAST" and "BRIGHTNESS" can be adjusted.

Screen Adjustment Procedure

1. Enter the Screen adjustment mode:
Press the PIC button on the remote or go to main menu, then Set-up, then press Screen.
2. Select settings:
Press the ( / ) buttons on the remote or on the screen when in Set-up Screen, adjust the
selected feature to the desired setting.
3. To Exit do not press any button on the remote for 5 seconds or in Set-up Screen press
the top left corner to exit:

Parking Brake

1. When the vehicle is stopped and the parking brake is on, the "PARKING Brake" wire must be
connected to the parking brake (-) switch in order for the monitor to display video.
2. The Parking brake does not apply when using the reverse backup camera feature.
3. When the "parking brake" is off, the front monitor will display a "Caution" with blue background,
preventing the driver from watching video while driving. This is for your safety and to reduce the
risk of a traffic accident.
Please see "INSTALLATION SECTION" for installation on the parking brake wire.
17