Miele KM 7404 FX Operating And Installation Instructions page 79

Electrical connection

Danger of injury.
Miele cannot be held liable for
unauthorised installation,
maintenance and repair work as this
can be dangerous to users.
Miele cannot be held liable for
damage or injury caused by incorrect
installation, maintenance or repair
work, or by an inadequate or faulty
earthing system (e.g. electric shock).
This hob must be connected to the
mains electrical supply by a suitably
qualified and competent person, in
accordance with current local and
national safety regulations.
After installation ensure that all
electrical components are shielded
and cannot be accessed by users.
Total power rating
See data plate
Connection data
The connection data is quoted on the
data plate. Please ensure these match
the household mains supply.
Please see wiring diagrams for
connection.
Separators
It must be possible to disconnect the
hob from the mains at all poles using
disconnecting devices! A contact
distance of at least 3 mm must be
observed in the switched-off state! The
disconnecting devices are overcurrent
protection devices and residual current
protection devices.
Installation
79