Dell Latitude 5300 2-in-1 Chrome Service Manual page 60

3. Peel the adhesive tape and disconnect the EMR sensor cable from the connector on the system board [1].
4. Peel the adhesive tape and disconnect the touch screen cable from the connector on the system board [2].
5. Remove the single (M2x4) screw that secures the eDP cable bracket to the system board [3].
6. Lift the eDP cable bracket from the system board [4].
7. Disconnect the eDP cable from the system board [5].
60 Komponentide eemaldamine ja paigaldamine