CHAPTER
2
Learn what you can do with your Honeywell BW™ Icon Detector, from commissioning to
Calibration.
Activate the Detector
To turn the detector on, press and hold the button for four seconds. LEDs turn on, and the
detector vibrates and beeps.
Self Test
When the detector is activated, it performs several start-up tests.
Battery
l
Data Flash
l
RTC. Real Time Clock
l
Temperature sensor.
l
BLE module
l
Sensors
l
Bump and Calibration due date
l
When the detector has passed all the start-up self-tests, it enters the regular operation mode.
Deactivate the Detector
To turn the detector off, press and hold the button for four seconds. LEDs turn on, and the
detector beeps four times.
BW Icon
Operations
9
User Manual