Removing The Exhaust Filter; Cleaning The Exhaust Filter; Inserting The Exhaust Filter; Changing The Batteries - Bosch BGB6 User Manual

en Cleaning and servicing
Requirement: The dust bag has
been removed.
→ "Changing the dust bag", Page 19
In order to release the motor pro-
1.
tection filter from the catch mech-
anism, pull on the side tabs.
→ Fig.
25
Remove the motor protection filter
2.
in the direction of the arrow.
Tap out the motor protection filter.
3.
If the motor protection filter is very
4.
dirty, rinse it.
→ Fig.
26
Leave the filter to dry for at least
5.
24 hours.
Refit the motor protection filter into
6.
the appliance and lock it in place
at the top.
Insert the dust bag.
7.
→ "Changing the dust bag",
Page 19
→ "Closing the lid", Page 19
8.

Removing the exhaust filter

Requirement: The lid is open.
→ "Opening the lid", Page 19
Push the locking tab in the direc-
1.
tion of the arrow and release the
exhaust filter.
Remove the exhaust filter from the
2.
appliance.
→ Fig.
27

Cleaning the exhaust filter

For optimum performance, clean or
replace the exhaust filter once a year.
Tip: After vacuuming fine dust
particles, clean or replace the ex-
haust filter in order to guarantee the
appliance's suction.
1
Depending on the appliance specifications
20
Note: The filtering effect of the ex-
haust filter is retained, even if the fil-
ter surface becomes discoloured.
Cleaning the HEPA hygiene filter
The HEPA hygiene filter consists of a
filter unit.
Tip: To clean the filter unit thor-
oughly, you can clean the filter unit in
the washing machine. To protect the
rest of the laundry, place the filter
unit in a laundry bag. Wash the filter
unit at 30 °C using a gentle pro-
gramme and the lowest spin speed.
Requirement: The exhaust filter has
been removed.
→ "Removing the exhaust filter",
Page 20
Tap out the filter unit.
1.
Rinse the filter unit under running
2.
water.
→ Fig.
Leave the filter unit to dry for at
3.
1 least 24 hours.
Insert the filter unit into the appli-
4.
ance.
→ "Inserting the exhaust filter",
Page 20

Inserting the exhaust filter

Requirement: The lid is open.
→ "Opening the lid", Page 19
Place the exhaust filter on the ex-
1.
1
haust grille so that it clicks audibly
into place.
→ Fig.
→ "Closing the lid", Page 19
2.

Changing the batteries

Remove the cover.
1.
→ Fig.
28
29
30
1