HP StorageWorks DLT80 Reference Manual page 33

Figure 14: Connecting a single external DLT80 drive
4. Attach the SCSI signal cable 1 to the SCSI connector 2 located on the rear
5. Turn thumbscrews into place to secure the cable to the connector.
6. Attach the terminator (not shown) to the SCSI connector 3.
7. Plug the drive's AC power cord 4 into the drive, then into a grounded AC
8. Turn ON all peripheral devices.
9. Turn ON the server.
DLT80 Tape Drive Reference Guide
2
3
4
panel of the DLT drive and then to the external SCSI-2 port on the server.
WARNING: To reduce the risk of electric shock or damage to your equipment,
do not disable the power cord grounding feature. This equipment is designed
for connection to a grounded (earthed) power outlet. The grounding plug is an
important safety feature.
outlet.
Connecting an External DLT80 Tape Drive
1
33