1. Manuals
  2. Brands
  3. Compex Manuals
  4. Switch
  5. SXP2226WM
  6. User manual

Compex SXP2226WM User Manual

24-port + 2 fixed gigabit web-managed switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Compex SXP2226WM

Summary of Contents for Compex SXP2226WM

  • Page 2: Trademark Information

    Novell Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. Notice: Copyrights © 2002 by Compex, Inc. All rights reserved. Reproduction, adaptation, or translation without prior permission of Compex, Inc. is prohibited, except as allowed under the copyright laws. Manual Revision by Ong Manual Number: U-0358-V1.1C...

  • Page 3: Fcc Notice

    Declaration of Conformity Compex, Inc. declares the following: Product Name: Compex 24-Port 10/100Mbps plus 2 1000Base-T Copper Ports with Web Management Switch Model No: SXP2226WM conforms to the following Product Standards: This device complies with the Electromagnetic Compatibility Directive (89/336/EEC) issued by the Commission of the European Community.
  • Page 4 Therefore, this product is in conformity with the following regional standards: FCC Class A  following the provisions of FCC Part 15 directive; CE Mark  following the provisions of the EC directive. This Class A digital apparatus complies with Canadian ICES-003. November 2002...

  • Page 5: Technical Support Information

    The warranty information and registration form are found in the Quick Install Guide. For technical support, you may contact Compex or its subsidiaries. For your convenience, you may also seek technical assistance from the local distributor, or from the authorized dealer/reseller that you have purchased this product from.

  • Page 6: About This Document

    In this document, special conventions are used to help and present the information clearly. The Compex 24-Port 10/100/1000Mbps plus 2 1000Base-T Copper Ports with Web Management Switch SXP2226WM is often referred to as Compex SXP2226WM in this document. Below is a list of conventions used throughout.

  • Page 7: Table Of Contents

    3.1.2 Rack-Mounted installation.................. 11 Chapter 4 Software Installation ................13 Configuration on PC settings ..................13 Configuration of Compex SXP2226WM using Web-based Interface........ 14 4.2.1 Login to Web Browser Interface ................. 14 Chapter 5 Configure Compex SXP2226WM using Web Interface.....18 Port Configuration ......................18...
  • Page 8 Examples on Port Trunking ................24 Mirror Control ....................... 26 5.4.1 Examples on Port Mirroring ................26 Changing of IP Address....................28 Chapter 6 Advanced Configuration for Compex SXP2226WM ......30 Aging Control........................ 30 Searching of Address ..................... 31 6.2.1 Host Search......................31 6.2.2 MAC Search ......................

  • Page 9: Chapter 1 Product Overview

    Java-enabled web browser. Through the management interface, you can also change the transmission mode of all ports on Compex SXP2226WM switch. This means that you can change the operating mode of any port to 10 Base-T half duplex, 10 Base-T full duplex, 100 Base-TX half duplex, 100 Base-TX full duplex or N-way Auto-negotiation at any time.
  • Page 10 Product Overview • Virtual LAN (VLAN) Compex SXP2226WM can support up to 24 port-based VLANs and static configuration of 802.1Q VLAN. It allows network administrator to separate the network into a few segments by defining which port belong to which VLAN segment.

  • Page 11: Panel Views

    Linking Up 10Base-T and 100Base-TX Technology One-time migration from 10Base-T to 100Base-TX technology can be very costly. Compex SXP2226WM addresses this problem by allowing existing 10Base-T networks to communicate with 100Base-TX networks. Performance does not degrade as each 10Base-T/100Base-TX segment continues to operate at its own speed.
  • Page 12 Chapter 1 Product Overview Figure 1.3c Front Panel View of Compex SXP2226WM (Section #2) Figure 1.3d Back Panel View of Compex SXP2226WM...

  • Page 13: Panel Features

    Chapter 1 Product Overview Panel Features Features Status and Indication PWR LED Steady Green Power is supplied to the switch. No power is supplied to the switch. FDX/COL LEDs Steady Orange The port is operating in Full (For Port 1 to 24) Duplex mode.
  • Page 14 Chapter 1 Product Overview Features Status and Indication LNK 100 LEDs Steady Green Individual port is connected at (For Port 25 and 26) 100Mbps. • No network connection is established to the device • The network is running at 1000Mbps. LNK 1000 LEDs Steady Green Individual port is connected at...

  • Page 15: Specifications

    Chapter 1 Product Overview Specifications • Industry Standards Complies with • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3ab 1000Base-T • IEEE 802.3x Flow Control • IEEE 802.1Q VLAN • IEEE 802.1p Priority Queuing • IEEE 802.1ad Link Aggregation •...
  • Page 16 Chapter 1 Product Overview • MAC Address Table • Switching Buffer 6Mbits • Bandwidth 9.6Gbps • Virtual LAN Port-based VLAN • Port Trunking • Port Mirroring • Priority Queuing 4 levels • Environmental Operating temperature: 0ºC to 45ºC Requirements Storage temperature: -20ºC to 70ºC Operating humidity: 10% to 90% RH...

  • Page 17: Chapter 2 Getting Started

    Chapter 2 Getting Started Chapter 2 Getting Started This chapter outlines the basic requirement for any installation and configuration of Compex SXP2226WM. Packaging Content Thank you for purchasing the Compex Web Managed Switch SXP2226WM. You will find the following items in the package: •...

  • Page 18: Chapter 3 Hardware Installation

    Chapter 3 Hardware Installation Compex SXP2226WM can be installed as a desktop unit or mounted on a 19-inch rack. There are two types of installation for Compex SXP2226WM, one is to connect your PC directly to the management port. Alternatively, you can configure by linking the management port to one of the LAN ports and configure the switch through one of the ports.

  • Page 19: Rack-Mounted Installation

    Please refer to Chapter 4 for details. 3.1.2 Rack-Mounted installation Position one bracket to align with the holes on one side of Compex SXP2226WM and secure it with the smaller bracket screws (1/8-inch diameter). Then attach the other bracket to another side of it.
  • Page 20 Chapter 3 Hardware Installation Method #2 – Connect from Management Port to LAN port An alternative way to set up your Compex SXP2226WM is to connect the management port to one of the available LAN ports. Figure 3.1b Another method of connection...

  • Page 21: Chapter 4 Software Installation

    Software Installation Chapter 4 Software Installation This chapter explains the basic set up procedures of configuring Compex SXP2226WM using the web-based interface. Configuration on PC settings Each PC in the LAN must be configured in order for them to communicate with Compex SXP2226WM.

  • Page 22: Configuration Of Compex Sxp2226Wm Using Web-Based Interface

    Software Installation Configuration of Compex SXP2226WM using Web-based Interface Activate your Internet browser on your workstation which is connected onto the same network as Compex SXP2226WM. Enter the URL Address, http://192.168.100.128. 4.2.1 Login to Web Browser Interface The following is a list of the various ways for different browsers in accessing a website.
  • Page 23 Figure 4.2a Login to Remote Access Switch Manager The Main Page will display as shown in Figure 4.2b. The image of Compex SXP2226WM is shown on the upper right window. The status of each switch port (i.e. link, speed and duplex mode) can be seen clearly from the LED displays on the image.
  • Page 24 Search for the connected Section 6.2.1 device in the network based on Host address Mac Address Search Search for the connected Section 6.2.2 device in the network based on MAC address Identity Check/change system Section 6.3 name, location or contact of Compex SXP2226WM...
  • Page 25 Chapter 4 Software Installation OPERATION Reference in Description menu User’s Manual Save Settings Save all settings Section 7.1.1 Restore Settings Restore all settings to factory Section 7.1.2 default Reboot Switch Restart the device Section 7.2 Change Password Amend password Section 7.3 system administrator Logout Exit from the web-based...

  • Page 26: Chapter 5 Configure Compex Sxp2226Wm Using Web Interface

    Compex SXP2226WM. In order to configure any of the port in Compex SXP2226WM, you need to select the port from the image. Simply use your mouse and click on any of the ports and the setting will appear as shown below.
  • Page 27 Chapter 5 Configure Compex SXP2226WM using Web Interface Notice that the “Link state” option indicates ‘Up’. This shows that the port is connected to the network. It can either be in “Up” (Connected) or ‘Down’ (No connection) state. Speed/Duplex To select the operation mode of the chosen port.

  • Page 28: Virtual Lan Configuration

    However, all data packets in a VLAN are constrained, so different end stations in different VLANs cannot communicate with each other directly. Compex SXP2226WM supports port-based VLAN, i.e. the VLAN is specified by selecting a group of ports VLAN.

  • Page 29: Examples On Virtual Lan

    For example, PC 1 in the IT Department is using the subnet IP Address of 192.168.88.20. After configuring the Virtual LAN through the web interface of Compex SXP2226WM, PC 2, which is in the HR Department, is able to communicate with PC 1. However, PC 3 is not able to communicate with...
  • Page 30 Chapter 5 Configure Compex SXP2226WM using Web Interface To configure VLAN01, Choose VLAN ID field as 01 and hit on “Select” button. Choose Port 1, 5, 9 and 17 and click on the “Apply” button. Figure 5.2c Settings for VLAN 01 For the configuration on VLAN02, please repeat the procedures shown in VLAN01.

  • Page 31: Expand The Limitation On Bandwidth

    Expand the limitation on bandwidth Port Trunking is the ability to group together several switch ports to increase the bandwidth between Compex SXP2226WM and other switch/es. This is an inexpensive method to increase throughput between switches. We define the Port Trunking as the ability to group a set of ports into a single logical link.

  • Page 32: Examples On Port Trunking

    For Units 1 and 3, Port #1 and #2 are selected as trunking ports, whereas for SXP2226WM Unit 2, Port #1, #2, #9 and #10 are being selected. Port #12 of Unit 1 is set as a CPU port. After selecting the respective trunking group for individual switches, all SXP2226WM units combined the bandwidth to increase the network speed.
  • Page 33 Figure 5.3c and 5.3d. Click on the “Apply” button and the Trunking function will get activated. Figure 5.3c Setting the Trunking ports for SXP2226WM Unit #1 and #3 Figure 5.3d Setting the Trunking ports for SXP2226WM Unit #2 NOTE Please note that if your CPU port is set to any of the ports involved in trunking configuration, you will not be able to activate the function.

  • Page 34: Mirror Control

    Chapter 5 Configure Compex SXP2226WM using Web Interface Mirror Control This function allows you to set up a ‘mirror’ port of any specified port/s from 1 to 26, such that you can monitor the transmitted or received traffics of the monitored port/s without intervening them.
  • Page 35 Chapter 5 Configure Compex SXP2226WM using Web Interface From the example shown in Figure 5.4b, Port #23 is set as a mirror port to monitor the traffic of Port #1. Data packets that are received at Port #1 will send a duplicate packet to Port #23. In this way, the traffic of Port #1 can be monitored through Port #23 (mirror port) without interfering the traffic in Port #1.

  • Page 36: Changing Of Ip Address

    You may set and save your addresses in the individual IP Index with different addresses. This means that if your workstation is pre-configured as 192.168.100.200, you may set your Compex SXP2226WM as 192.168.100.xxx at any of the IP INDEX. Ensure that both your workstation and Compex SXP2226WM are in the same subnet.
  • Page 37 Chapter 5 Configure Compex SXP2226WM using Web Interface Gateway IP Address # Gateway is a generic term for an internetworking system that joins two networks together. It can be implemented completely in this web page. You can easily access to other workstations through this IP Address.

  • Page 38: Chapter 6 Advanced Configuration For Compex Sxp2226Wm

    Chapter 6 Advanced Configuration for Compex SXP2226WM Chapter 6 Advanced Configuration for Compex SXP2226WM Aging Control Aging control is for controlling the retention period of address entries in the switch’s forwarding table. If the aging control is enabled, a learned address entry (not include the static entry) will be removed from the forwarding table if there is no update within a pre-determined period (1~128 seconds).

  • Page 39: Searching Of Address

    Figure 6.2a Searching of Host IP Address NOTE This Host Search function only applies to the setting up of SXP2226WM via LAN Port Please refer to details for “Method #2 – Connect from Management Port to LAN port” on Page 12.

  • Page 40: Mac Search

    Chapter 6 Advanced Configuration for Compex SXP2226WM 6.2.2 MAC Address Search This feature helps to look for the particular workstation with MAC Address stated in the field. This provides a useful way while configuring the VLAN. The system will search through the device for the port’s ownership of that particular PC.

  • Page 41: Chapter 7 Using Operation Menu

    Chapter 7 Using OPERATION Menu Chapter 7 Using OPERATION Menu Save and Restore Settings 7.1.1 To Save Settings Save Settings is for storing the current settings and configurations of the switch. Once the switch is powered-up or rebooted, the saved configurations and settings will be loaded into the switch, so user does not need to reconfigure the switch again.

  • Page 42: Reboot Switch

    Using OPERATION Menu Reboot Switch Reboot Switch is for rebooting switch remotely. It is useful when user restore saved configurations. Figure 7.2a Reboot Compex SXP2226WM Changing Password This option allows the System Administrator to amend the current password. Figure 7.3a Change Password...

  • Page 43: Logging Out Of Web Interface

    Chapter 7 Using OPERATION Menu Logging out of Web Interface Click the logout option from the Configuration Menu and the following screen will appear. Hit the “Continue” button if you wish to login again, or else just click the “X” at the right top corner of the page to close this web management interface.

  • Page 44: Chapter 8 Using Help Menu

    This function displays the information about the management system of Compex SXP2226WM. Figure 8.1a Information on the System Technical Support This page displays information on technical support. You may refer to the respective technical group supported by Compex in the different countries as shown below. Figure 8.2a Technical Support Information...

  • Page 45: Chapter 9 Clearing Password And Restoring Default Ip Address

    Chapter 9 Clearing Password and Restoring Default IP Address If the password or IP address of Compex SXP2226WM is lost, or you probably wish to upgrade your management firmware, you can easily operate the DIP switch located in the front panel.

  • Page 46: Clearing Of Password

    Power ON your device and wait for about 1 minute to proceed. Change the DIP Switch in the sequence stated below within 30 seconds: Stage B Stage D Stage C Now, the IP Address of Compex SXP2226WM has set to factory default, which is 192.168.100.128.

  • Page 47: Chapter 10 Upgrading New Firmware Configuration

    From the PC, startup web browser and enter http://192.168.100.128. NOTE Other IP addresses are not supported. In firmware upgrade mode, Compex SXP2226WM will default to 192.168.100.128. The Upgrade Firmware page will appear. Figure 10.1a Firmware Upgrade Interface Click the browser button to locate the firmware in the computer.

Table of Contents