Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Compex sxp2224wm
Summary of Contents for Compex sxp2224wm
-
Page 2: Trademark Information
Novell Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. Notice: Copyrights © 2005 by Compex, Inc. All rights reserved. Reproduction, adaptation, or translation without prior permission of Compex, Inc. is prohibited, except as allowed under the copyright laws. Manual Revision by Ong Manual Number: U-0374-V1.2C... -
Page 3: Fcc Notice
Declaration of Conformity Compex, Inc. declares the following: Product Name: Compex 24-Port 10/100 + 1 Modular Exp. Slot Web-managed Switch Model No: SXP2224WM conforms to the following Product Standards: This device complies with the Electromagnetic Compatibility Directive (89/336/EEC) issued by the Commission of the European Community. -
Page 4: Technical Support Information
The warranty information and registration form are found in the Quick Install Guide. For technical support, you may contact Compex or its subsidiaries. For your convenience, you may also seek technical assistance from the local distributor, or from the authorized dealer/reseller that you have purchased this product from. -
Page 5: About This Document
In this document, special conventions are used to help and present the information clearly. The Compex 24-Port 10/100 + 1 Modular Exp. Slot Web-managed Switch is often referred to as Compex SXP2224WM in this document. Below is a list of conventions used throughout. -
Page 6: Table Of Contents
Table of Contents Copyrights © 2005 Compex Systems Pte Ltd ..................i Trademark Information........................i Disclaimer ............................i Your Feedback..........................i FCC NOTICE..........................ii Declaration of Conformity.......................ii Technical Support Information.......................iv About This Document ........................v How to Use this Document......................v Firmware ............................v Conventions.............................v Chapter 1 Product Overview..................1 Introduction..........................1... - Page 7 Table of Contents Chapter 5 Access to Web Interface................ 14 Configuration on PC settings ....................14 Configuration of Compex SXP2224WM using Web-based Interface ........15 5.2.1 Login to Web Browser Interface................15 Chapter 6 Configure Compex SXP2224WM using Web Interface ..... 18 Port Status ..........................18 Port Configuration........................19...
-
Page 8: Chapter 1 Product Overview
Chapter 1 Product Overview Introduction The Compex SXP2224WM is a 24-ports 10/100 Mbps + 1 modular slot web-managed switch that offers fiber or copper-based gigabit connectivity through its expansion modules. The SXP222WM comes with enhanced features that can be catered for today’s most demanding Ethernet-based switching applications. - Page 9 • Port Priority for traffic prioritization (QoS) Compex SXP224WM supports first come first serve basis. You can set the port priority according to the types of operations you are working in. • Bandwidth Control for limiting network bandwidth...
-
Page 10: Panel Views
Product Overview Panel Views Figure 1.3a Front Panel View of Compex SXP2224WM Figure 1.3b Front Panel View of Compex SXP2224WM (Section #1) Figure 1.3c Front Panel View of Compex SXP2224WM (Section #2) Figure 1.3d Back Panel View of Compex SXP2224WM... -
Page 11: Panel Features
Chapter 1 Product Overview Panel Features Features Status and Indication Steady Green The port is connected to the switch. LNK/ACT LEDs Blinking Green The port is transmitting or receiving data. There is no connection established in the network. FDX/COL LEDs Steady Amber The port is operating in Full Duplex mode. -
Page 12: Specifications
Chapter 1 Product Overview Specifications • Industry Standards Complies with • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3ab 1000Base-T • IEEE 802.1p Priority Queuing • IEEE 802.1ad Port Trunk • • Safety Certifications CE Mark • FCC Part 15 Class A •... - Page 13 Chapter 1 Product Overview • • Transfer Rate 14,880pps Ethernet port • 148,800pps Fast Ethernet port • 1488,000pps Gigabit port • Packet Buffer 3Mbits • Back Plane Capacity 8.8Gbps • Bandwidth Control Per port support bandwidth control. • Virtual LAN Port-based VLAN with VLAN ID up to 255 •...
-
Page 14: Chapter 2 Getting Started
Chapter 2 Getting Started Chapter 2 Getting Started This chapter outlines the basic requirement for any installation and configuration of Compex SXP2224WM. Packaging Content Thank you for purchasing the Compex Web Managed Switch SXP2224WM. You will find the following items in the package: •... -
Page 15: Chapter 3 Network Applications
Chapter 3 Network Applications Compex SXP2224WM is ideally suitable for interconnecting networking segments. It is a multi- port switch that can be used to build high-performance switched workgroup networks. It supports auto MDIX/MDX which allows you to connect to another Ethernet switch or workstations without changing straight or cross-over network cable. -
Page 16: Segment Bridge
Two Ethernet switches are connected to Compex SXP2224WM. All devices in the network can communicate with one another through Compex SXP2224WM. A server is connected to the switch to allow users from accessing the data on the server. Backbone Link... -
Page 17: Chapter 4 Hardware Installation
Chapter 4 Hardware Installation Compex SXP2224WM can be installed as a desktop unit or mounted on a 19-inch rack. There are two types of installation for Compex SXP2224WM, one is to connect your PC directly to the management port. Alternatively, you can configure by linking the management port to one of the LAN ports and configure the switch through one of the ports. -
Page 18: Rack Installation
Chapter 4 Hardware Installation Check that the Power LED at the front panel of Compex SXP2224WM has lighted up. The unit is now ready to use. Rack installation Figure 4.2a Secure brackets onto Compex SXP2224WM Position one bracket to align with the holes on one side of Compex SXP2224WM and secure it with the smaller bracket screws (3mm diameter) as shown in Figure 4.2a. -
Page 19: Installation Of Expansion Module
Unscrew and remove the metal plate from the expansion slot. Insert the module carefully into the expansion module window and push it along the rail until it is firmly inserted into the connector of the PCB board of Compex SXP2224WM. -
Page 20: Removal Of Expansion Module
Connecting Console cable to Compex SXP2224WM Console Configuration allows you to set Compex SXP2224WM for remote terminal as if the console terminal is directly connected to it. The console cable is a male DB-9 connector that enables a connection to a PC or terminal for monitoring and configuring Compex SXP2224WM. -
Page 21: Chapter 5 Access To Web Interface
Access to Web Interface Chapter 5 Access to Web Interface This chapter explains the basic set up procedures of configuring Compex SXP2224WM using web-based interface. Configuration on PC settings Each PC in the LAN must be configured in order for them to communicate with Compex SXP2224WM. -
Page 22: Configuration Of Compex Sxp2224Wm Using Web-Based Interface
Access to Web Interface Configuration of Compex SXP2224WM using Web-based Interface Activate your Internet browser on your workstation which is connected onto the same network as Compex SXP2224WM. Enter the URL Address, http://192.168.100.128. 5.2.1 Login to Web Browser Interface The following is a list of the various ways for different browsers in accessing a website. - Page 23 Figure 5.2a Login to Remote Access Switch Manager NOTE Please note that the username and password are case-sensitive. The Main Page will display as shown in Figure 5.2b. Configuration Window Command Menu Window Figure 5.2b Main Page of Compex SXP2224WM...
- Page 24 Chapter 5 Access to Web Interface The overall descriptions for individual sub-functions are listed as shown: Reference in Menu Description User’s Manual View every port’s status that depends on Section 6.1 Port Status the user setting and the negotiation result. Port Change each port’s parameters.
-
Page 25: Chapter 6 Configure Compex Sxp2224Wm Using Web Interface
Chapter 6 Configure Compex SXP2224WM using Web Interface Chapter 6 Configure Compex SXP2224WM using Web Interface Compex SXP2224WM eases configuration process with a user- friendly web-based interface. You can now simply complete the configuration process in just a few minutes. -
Page 26: Port Configuration
Configure Compex SXP2224WM using Web Interface Port Configuration This functions allows you to modify the configuration of Compex SXP2224WM. Simply select the options from the drop-down menu in the individual fields and click on the “Apply” button to update the changes. -
Page 27: Trunk Configuration
Trunk Configuration Port Trunking is the ability to group together several switch ports to increase the bandwidth between Compex SXP2224WM and other switch/es. This is an inexpensive method to increase throughput between switches. We define the Port Trunking as the ability to group a set of ports into a single logical link. The port trunk acts as single link between switches. -
Page 28: Examples On Port Trunking
6.3.1 Examples on Port Trunking From Figure 6.3b, two Compex SXP2224WM units are used to perform the trunking ability. For unit 1, port 1 and 5 are selected as trunking ports; and port 26 is connected to a control station. For unit 2, port 5 and 6 are selected as trunking ports. - Page 29 Configure Compex SXP2224WM using Web Interface Using a RJ45 Ethernet cable to connect port 1 and 5 of Compex SXP2224WM unit 1 to port 1 and 5 of Compex SXP2224WM unit 2 respectively. From the control station, logon to http://192.168.100.128. Go to the main menu and select Trunk Configuration option.
-
Page 30: Virtual Lan Configuration
However, all data packets in a VLAN are constrained, so different end stations in different VLANs cannot communicate with each other directly. Compex SXP2224WM not only supports port-based VLAN, i.e. the VLAN is specified by selecting a group of ports VLAN, but also tagged VLAN. - Page 31 Figure 6.4b illustrated the setup of port based VLAN in a company. Port 2 and 6 of Compex SXP2224WM are attached to two Ethernet switches ; Port 16 and 24 are attached an Ethernet switch individually. When Port 2 and 6 are assigned as port based VLAN, the PCs in VLAN 1 will be able to communicate with one another within the same VLAN.
- Page 32 Chapter 6 Configure Compex SXP2224WM using Web Interface Enter the value “1” in the VLAN Group field and select the port members (port 2 and 6). Figure 6.4d Adding members into PortBased VLAN Group 1 Click on the “Apply” button and you will see the updated screen as shown in Figure 6.4e.
- Page 33 Chapter 6 Configure Compex SXP2224WM using Web Interface 6.4.2 Tagged VLAN 802.1Q To create Tagged VLAN, select 802.1Q from the VLAN Mode field. Please note that you are not allowed to configure and delete the default VLAN (VLAN ID: 1). To create a new entry, Click on the AddNew button.
- Page 34 Chapter 6 Configure Compex SXP2224WM using Web Interface Please note that the changing of VLAN mode (from PortBased to 802.1Q or vice versa) will reset the VLAN configuration to its default setting. Refer to the screenshot shown below. Click OK button to proceed.
-
Page 35: Port Monitoring Configuration
Chapter 6 Configure Compex SXP2224WM using Web Interface Port Monitoring Configuration This function allows you to set up a ‘mirror’ port of any specified port/s from 1 to 26, such that you can monitor the transmitted or received traffics of the monitored port/s without intervening them. - Page 36 Chapter 6 Configure Compex SXP2224WM using Web Interface Go to Port Monitoring option from the main menu. Select “RX & TX” in the Port Monitoring Mode field. Choose port 24 as a monitoring port Put a tick at the check box of port 1 and 5 to set as a monitored ports.
-
Page 37: Qos Configuration
Asynchronous Transfer Mode (ATM), etc. The primary goal of QoS is to provide priority including dedicated bandwidth, controlled jitter and latency. With this ability, Compex SXP2224WM is able to improve the loss characteristics and ensure that the priority for one or more flows does not make other flow fails. - Page 38 If a normal packet is transmitted from a “high” or “low” setting port, Compex SXP2224WM will deliver all the packets to its designated port according to the QoS mode ratio setting. 802.1p* Priority section If a tagged packet is being transmitted from any port, it will directs the packet to the global setting.
-
Page 39: Bandwidth Control
This means that users are forced to restructure their operations due to network load limitations. To overcome this problem, Compex SXP2224WM is specially designed to control the bandwidth using relatively bandwidth technique. It enables you to specify the maximum line bandwidth (in Mbps) that a particular... -
Page 40: Chapter 7 Miscellaneous Operation
Chapter 7 Miscellaneous Operation Chapter 7 Miscellaneous Operation This chapter will brief on how to configure system related settings, e.g. changing of password, IP configuration, restore the setting to factory default and configuring auto aging, etc. Advanced Switch Configuration Broadcast Storm Filter: •... -
Page 41: Password Setting
Retrieval of password If you have forgotten your password, not to worry! Simply use the supplied RS232 console cable and connect Compex SXP2224WM to the console interface. Enter the username as root and password as pds, hit on the “Enter” key from the keyboard. From there, you can change your password. -
Page 42: Backup & Restore Settings
Chapter 7 Miscellaneous Operation Backup & Restore Settings This option allows you to backup and restore your configuration on Compex SXP2224WM. Figure 7.3a Backup and restore settings Restore System Default Setting Current configurations, except password and identity, are replaced by vendor’s default settings, then the switch is rebooted automatically. -
Page 43: Reboot System
Miscellaneous Operation Reboot System Reboot Switch is for rebooting switch remotely. It is useful when you restore saved configurations. Figure 7.5a System reboot System Information This function displays the information about the management system of Compex SXP2224WM. Figure 7.6a System Information... -
Page 44: Ip Configuration
If you have encountered any problems, simply write an email to our friendly technical support officer. Figure 7.8a Technical Support Logout By clicking on the “Logout” button, you will get out of the web interface of Compex SXP2224WM. However, if you wish to login again, you can just click on the “<Back” button.