Table of Contents
Advertisement
Figure 19
1. Belt tension release arm
2. Belt tension adjustment
knob
7. Remove the belt from around the PTO pulley (Fig. 20).
Additional belt slack can be obtained (if needed) by
turning the belt tension adjustment knob.
Figure 20
1. PTO pulley
8. Replace the grill.
9. Press the button of the mid quick attach and twist the
lever clockwise to release the mower (Fig. 21).
3
2
1
m--5511
3. Belt tension released
1
m--3454
1
1. Mid quick attach button
10. Pull the two spring loaded J-pins from the deck lift arms
and twist them slightly so that they stay disengaged
(Fig. 22).
1
1. J-pin
11. If you wish to remove the pulley box, push the latch
release buttons on the front quick attach (Fig. 23) and
raise the latch levers to open the latches holding the
pulley box. Remove the pulley box.
11
2
Figure 21
2. Mid quick attach lever
Figure 22
m--3457
m--3456
Advertisement
Table of Contents
