Installation Procedures - Panasonic CQ-R235W Manual

Installation
E
N
G
L
I ¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
S
hands and fingers.
H
¡We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
16

Installation Procedures

Note: Disconnect the cable from the negative (–) battery terminal.
1. Secure the Mounting Collar q.
Insert Mounting Collar q into the dashboard, and bend the mounting tabs out with a screwdriver.
Dashboard
q Mounting Collar
2. Secure the rear of the unit.
a) Check the electrical connections by referring to this operating instructions.
b) Connect Mounting Bolt t, using a suitable wrench.
c) Insert Power Connector y to the unit.
d) Insert the unit into Mounting Collar q and push it in until a "click" is heard.
y Power Connector
Unit
e) Secure the rear of the unit to the car by either of the two recommended
methods.
¡ Using the Rear Support Strap e
Affix one end of the Rear Support
Strap e to the rear of the unit, and
the other end to the fire wall of car,
or some other metallic area.
18
(continued)
CQ-R235W
Screwdriver
t Mounting Bolt
rTapping Screw
Mounting Tab
Make sure that the
lock lever is flush
with the mounting
collar (not project-
ing outward).
Unit
Fire Wall of Car
3 mmø
w Hex. Nut
e Rear Support Strap
t Mounting Bolt
q Mounting Collar
Lock Lever