Quick Installation - ViewSonic E50 User Manual

Quick Installation

1.
Connect power cord
Connect the power cord to a properly
grounded AC outlet.
2. Connect video cable
• Make sure both the monitor and
computer are turned OFF.
• Con nect t he v ideo cable to t he
computer.
®
Macintosh users: Models older than
G3 require a Macintosh adapter. Attach
the adapter to the computer and plug
the video cable into the adapter.
To order a ViewSonic
adapter, contact ViewSonic.
See "Customer Support" on page 14.
3. Turn ON monitor and computer
Turn ON the monitor, then turn ON
the computer. This sequence (monitor
before computer) is very important.
Note : At this point Windows users
may receive a message asking them to
4. Install Display Optimization files
Insert the ViewSonic
ROM into your computer's CD-ROM
drive.
Note : If your computer does not have a
Power cord
AC wall outlet
ViewSonic E50/E50B
5.
®
Macintosh
®
Wizard CD-
CD-ROM drive, see "Customer Support"
on page 14.
Wait for the CD-ROM to auto-start.
Note : If the CD-ROM does not auto-
start:
double-click on the CD-ROM icon in
Windows Explorer, and then double-
click on viewsonic.exe.
Follow the on-screen instructions.
Windows users: Set the Timing Mode
Example: 800 x 600 @ 85Hz.
For instructions on changing the
resolution and refresh rate, see the
graphic card's user guide.
Installation is complete. Enjoy your
®
new ViewSonic color monitor.
To be best prepared for any future
customer service needs: print this user
guide and write the serial number in
"For Your Records" on page 4. (See
back of monitor.)
To register your product go online to
www.viewsonic.com.
®
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print
the registration form which you may
mail or fax to ViewSonic
Video cable
®
.
6