Setting Date And Time - Victor 1280-7 USB Operating Manual

29. SETTING THE DATE
Set Slide Switches as Example Below:
EXAMPLE: Set DATE to September 14, 2004 (09-14-04)
Step Enter Depress This Key
1. Clear Key (CE/C)
TIME/DATE Key and hold until
2.
3. 09
4. 14
5. 04
6. Tap TIME/DATE Key
7.
1. Depress the [CE/C] key. Your display with show 0. and the tape will read 0.C.
2. Depress the [TIME/DATE] key and hold until the display is flashing.
3. Enter the month, in our example, 09. Your display will show 9.
4. Enter the day, in our example, 14. Your display will show 914.
5. Enter the year, in our example 2004, as 04. Your display will show 91404.
6. Tap the [TIME/DATE] key to set the DATE. Your display will now show 09-14-2004.
7. To PRINT the DATE, depress the [#/S] key, your tape will show # 9.14.2004.
NOTE: The only key to enter the Date/Time display mode is the [TIME/DATE] key. The
only key to exit the Time/Date display mode is the [CE/C].
Flashing Numbers in This Format -
display flashes
#/S Key
Decimal
2
Your Display Will Show
0.
MM-DD-YYYY
9
914
91404
09-14-2004
09-14-2004
•
Rounding Σ
5/4
28
Tape Will Read
0.C
# 9.14.2004
GT CALC PC Print
. CALC P