Advertisement
Quick Links
John Lewis
Double
King size
Thank you for purchasing this Genoa 2 drawer stoprage Bed. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact your the John Lewis Helpline.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 90 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Genoa 2 Drawer Storage Bed
Stock Code: 810/84001
Stock Code: 810/84002
For product support or spare parts please call
the John Lewis Helpline;
E: mail@fwgroup-uk.com
T: 01244 689949
Advertisement
Related Manuals for John Lewis Genoa 2 Drawer Storage 810/84001
Summary of Contents for John Lewis Genoa 2 Drawer Storage 810/84001
- Page 1 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact your the John Lewis Helpline. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fitting and parts checklist M4 ALLEN KEY x 1 M8 X 16mm Bolt x 8 M5 ALLEN KEY x 1 M6 X 25mm Bolt x 2 M6 X 40mm Bolt x 8 Centre Plastic Cap x 15 Screw 3.5 x 40x 4 Side Plastic Clip x 30 Screw 3.5 x 30 x 40 Spring Washer M8 x 8...
- Page 3 Step by step assembly instructions Step One Remove the plastic cap from the wooden legs and attach them to the headboard (1) and foot board (2) by screwing in to the pre inserted nut’s as shown in the diagram below. Wooden Leg Pre-inserted Nut (6) x 4...
- Page 4 Step Three Attach washer (E) and bolt (F) into the metal xings on to both bottom supports (7). Do not fully tighten. E x 8 F x 8 Step Four Attach bottom supports (7) to centre support (8) and secure in to place using screws (I) as shown in the diagram below.
- Page 5 Step Five Insert the inner frame from step four inside the bed frame as shown below. Secure in to place by hooking the bolts on the inner frame on to the brackets on the side rails, as shown in g 1. Tighten using allen key (B) as shown in g 2.
- Page 6 Step Seven Insert 2 slats (4) into a centre clip (C) followed by a side plastic cap (D) on to the other end of both slats. The centre clip is attached to the centre rail on the bed and the side plastic clip is attached to the side rails as shown in the diagram below.
- Page 7 Step Nine Attach drawer panel (13) to drawer and tighten together using bolt (H) tighten with Allen key M4 (A). (x2) H x 8 Step Ten Slide drawers in to both sides of the bed frame. The bed is now ready for use.
-
Page 8: Care And Maintenance
Please be careful to retain all fitting when doing this. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London , SWIE 5NN.