Sony Ericsson S700i Working Instruction, Mechanical page 15

Step-by-Step Instructions
8 NOTE!
Be careful not to damage the two cables.
Slide both cables through the hole in the case
key front.
9 NOTE!
Use 14 Ncm of torque for the key hinge screws.
Assemble the two upper (1) and lower (2) hinge
frame holdings together with four new screws
10 NOTE!
If you have assembled a new case key front
doesn't forget to assemble a new system
connector.
The picture shows a correctly mounted system
connector.
11 NOTE!
Close the phone together 180º.
If necessary, place a new keyboard inside the
case key front by hand (1).
NOTE!
Make sure that the keyboard (1), volume keys
(2), kamera key (3) and the light guide (4) are
assembled and in the right position.
3/00021-1/FEA 209 544/89 B

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
15(51)