Related Manuals for Haier LE32B8500T
Summary of Contents for Haier LE32B8500T
- Page 1 LED LCD TV OWNER' S MANUAL MODEL: LE32B8500T Please READ this manual carefully before operating your TV, and retain it for future reference...
-
Page 2: Table Of Contents
Contents 1、 Safety and warnings......................2-3 2、 Introduction........................3、 Installation........................5-8 4、 Remote Controller......................5、 TV Operation........................10-21 6、 Trouble shooting...................... -
Page 3: 1、 Safety And Warnings
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. CAUTION 2) Keep these instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN! 3) Heed all warnings. CAUTION 4) Follow all instructions. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 5) Do not use this apparatus near water. NOT REMOVE COVER (OR BACK).NO USER 6) Clean only with dry cloth. - Page 4 SAFETY AND WARNINGS High voltages are used in the operation of this television Never stand on, lean on, or suddenly push the television or receiver. Do not remove the cabinet back from your set. its stand. You should pay special attention to children. Refer servicing to qualified service personnel.
-
Page 5: 2、 Introduction
INTRODUCTION Accessories Main features ① Used as Television, display terminal, PC display； Infrared Remote Controller.... 1 ② High luminance, wide viewing angle； Battery(AAA).......2 ③ Can store 500(DTV) programs； User’ s M anual.......1 ④ HDMI interface； Multi-Media player (USB); Main parameter Viewing Picture Size (Diagonal) 32"... -
Page 6: Installation
INSTALLATION KEYBOARD Front panel SOURCE MENU V- CH- CH+ Standby ≤8m 1．SOURCE： Display the input source menu. 2．MENU： Display main MENU. 3．V+/V- Adjust sound level. 1: Remote control sensor. In MENU mode, press“V+”or“V-”to adjust the item that you selected. 2: Indicator LED: RED STANDBY. - Page 7 INSTALLATION ANTENNA Note: Aerial connections:IEC(female). Input impendance:75 unbalanced.
- Page 8 INSTALLATION STEPS: Be sure both the TV and computer are Power off. 1.Connect VGA and audio cable 2.Connect power cord 3.Power on the TV, switch to PC mode 4.Power on the PC This sequence is very important. COMMON INTERFACE (CI) HDMI2(ARC) HDMI1 HEADPHONE...
- Page 9 INSTALLATION AV EQUIPMENT This TV provides one group of AV, one group of YPbPr for convenient connection to VCR, DVD or other video equipment. Please refer to the owner's manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows. COMMON INTERFACE (CI) HDMI2(ARC) HDMI1...
-
Page 10: 4、 Remote Controller
REMOTE CONTROLLER No function. Press to turn the sound on or off. (Mute) Press to open the shortcut menu of tool. TOOL Press to adjust the volume level. VOL +/- No function. Press to open a favorite channel list. In teletext mode, press to hold a page. -
Page 11: 5、 Tv Operation
TV OPERATION Installation Guide Press "OK" to enter the next prompt menu The installation guide only appear when the TV first time turn on or reset to factory set. Shop mode is the most energy mode. Continue? Please select an OSD language Cancel English French... - Page 12 YES to confirm. You will then go straight to DTV Completed Initial Quick Setup. tuning. You may repeat the above step if you also want Enjoy your Haier TV to skip the DTV tuning. An installation reminder will Press OK to Exit appear the next time you turn on the TV.
- Page 13 TV OPERATION 1.2 )Auto Tuning (DVB-C) 1). Press the MENU button and then press the▼▲ buttons Sweden Portugal Serbia to select the CHANNEL menu and then press the OK button. Rumania Slovenia Switzerland 2). Press the▼▲buttons to select Auto Tuning and then press the OK button.
- Page 14 TV OPERATION 2). Press the▼▲buttons to select DTV Manual Tuning 3). The CADTV Manual Tuning screen will pop up. and then press the OK button. Press the▼▲buttons to select(Frequency /Symbol (ks/s/QAM Type QAM) press the OK button to commence the search of that channel. When the CHANNEL Auto Tuning signal has been tuned, the picture and signal...
- Page 15 TV OPERATION Move: 3.SOUND MENU Use the arrow Buttons to select the channel you wish to The third item of the MENU is the SOUND MENU. move. Then press the Yellow Button to select Move You can adjust the sound effect here such as function.
- Page 16 TV OPERATION Automatic Power-down The default pass word is 0000, If you forget the 1.If after 4 hours from switch on and no changes have password, you can use the super password:9443. been made to the TV, for example no channel or volume Block program: Press ▼▲...
- Page 17 TV OPERATION 8.PVR function Select Disk 1.Prepare to record the program Check PVR File System Start PVR function only works in DTV. USB Disk From OPTION MENU enter into PVR File System Format In “OPTION MENU”, please choose “check Time Shift Size PVR File System”.
- Page 18 TV OPERATION 2.Record the program (Suggest to format the device by “High Speed Fs...”, As playing the DTV source, choose the channel and which can speed up the record.) ● click “ record”, the record frame will pop up. Click ” ●...
- Page 19 TV OPERATION 9.Timeshift function Prepare to record the program This TV allows you to pause and record the Please do not unplug the USB storage device currently watched digital program to a USB when the Time Shift function is activated. storage device, and to resume to the point where it was paused.
- Page 20 TV OPERATION Time Shift limitations: 1. When the Time Shift feature is activated, only the PLAY/PAUSE/STOP/ VOL+/VOL-/ MUTE keys and some basic operation keys (OK/EXIT/ navigation keys) are available. 2. Video playback may not be smooth and skip if USB recording speed does not meet the minimum requirements .
- Page 21 OK button to enter the USB menu. Pause Prev. Next Stop Repeat ALL Set A Haier Innovation Life ◀▶ Press to select the function icon, press OK button to confirm the function. ▼ Press or EXIT button to exit the control bar except for music.
- Page 22 TV OPERATION 11.Hotel Mode: Please press source key first,and then press number key “1001” to enter into Hotel Mode. Hotel Menu Hotel Mode Maximum Volume Volume Default Panel Button Respond Menu Button Respond Input Source Change Input Mode Start Start Channel Reset USB Clone Hotel Mode : Set Hotel mode on/off.
-
Page 23: 6、 Trouble Shooting
TROUBLE SHOOTING Trouble phenomenon Symptom Inspection Check Picture Audio antenna position, direction Snow Noise or connection antenna position, direction Ghost or connection Normal audio electronic equipment,car/ Interference Noise motorcycle,fluorescent light Volume(check if mute is activated or if the audio system Normal Picture connections are not correct) Mute...