Linksys 10/100 LAN Card 10/100 User Manual page 22

EtherFast ® 10/100 LAN Cards
Network Component Configuration
1. Once you are back at the Windows 95 desktop, click on your taskbar's
Start button, then Settings, then Control Panel, and then double-click
the Network icon.
2. The Network window will appear (next page). Click on the
Configuration tab. A window similar to the one below will appear. There
may be other components listed in addition to the ones shown below (for
example, Dial-up Adapter), which is normal. If
any of the components shown below are miss-
ing, however, you'll need to manually install
them. If that's the case, refer to Manually
Installing the Network Components on page 60
now.
• Client for Microsoft Networks
• Linksys LNE100TX Fast Ethernet Adapter
(LNE100TX v4)
• IPX/SPX-compatible Protocol
• NetBEUI
• TCP/IP
N N o o t t e e : : If you need to install
the TCP/IP Protocol, con-
tact your system adminis-
trator or ISP, or refer to the
Windows 95 documenta-
tion. If D D H H C C P P error mes-
sages appear during boot
up, this is a TCP/IP error.
Linksys does not provide
technical support for the
configuration or trou-
bleshooting of the TCP/IP
protocol.
19