Removing And Fitting The Battery; Fitting The Battery; Removing The Battery; Switching The Hedge Trimmer On/Off - Stihl HLA 65 Instruction Manual

English
► If the shaft can be pushed in or pulled out:
► Open the lever (1) of the quick release clamp (2) half
way.
► Hold the lever (1) of the quick release clamp (2) firmly
and tighten the screw (4) moderately.
► Close the lever (1) of the quick release clamp (2).
The shaft (3) can no longer be pushed in or pulled out
and the lever (1) is seated against the quick-action
clamp (2).
► If the lever (1) of the quick release clamp (2) cannot be
closed properly:
► Open the lever (1) of the quick release clamp (2) half
way.
► Loosen the screw (4).
► Close the lever (1) of the quick release clamp (2).
The shaft (3) can no longer be pushed in or pulled out
and the lever (1) is seated against the quick-action
clamp (2).

9 Removing and Fitting the Battery

9.1

Fitting the Battery

1
2
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages in position with a click.
46
9.2

Removing the Battery

► Lay the hedge trimmer on a level surface.
► Hold one hand in front of the battery compartment to
ensure the battery (2) does not fall out.
1
► Depress both locking levers (1).
The battery (2) is unlocked and can be removed.

10 Switching the Hedge Trimmer On/Off

10.1 Switching On

► Hold the hedge trimmer with one hand on the control
handle - wrap your thumb around the handle.
► Hold the hedge trimmer with the other hand on the loop
handle (HLA 65) or the handle hose (HLA 85) - wrap your
thumb around the handle hose.
9 Removing and Fitting the Battery
1
2
1
3
0458-765-9821-E
2