Flame Adjustment & Characteristics - Vermont Castings A232 Installation Instructions & Homeowner's Manual

FLAME ADJUSTMENT (RN/RP MODELS)
For units equipped with Hi/Lo valves, flame adjustment
is accomplished by rotating the Hi/Lo adjustment knob
located near the centre of the gas control. (Fig. 20a & b)
Turn
counterclockwise
to increase
flame height.
Turn
counterclockwise
to decrease
flame height.
Turn clockwise
to lower
flame height.
Fig. 20a
Turn clockwise
to increase
flame height.
Fig. 20b
- 11 -
FLAME CHARACTERISTICS
It is important to periodically perform a visual
check of the pilot and the burner flames.
Compare them to the pictorials illustrated
below (Fig. 22, 23). If any of the flames
appear abnormal call a service person.
3/8" - 1/2"
A232
SIT VALVE
PSE VALVE
Fig. 22
Fig. 23