D-Link DAP-2610 Quick Installation Manual page 5
Nuclias connect ac1300 wave 2 dual band poe access point
Hide thumbs
Also See for DAP-2610:
- Manual (87 pages) ,
- Quick installation manual (48 pages) ,
- Quick install manual (11 pages)
Advertisement
Installation
1. Place the mounting bracket on a wall or
ceiling.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
TECHNICAL SUPPORT
D-Link DAP-2610 Quick Install Guide
4. Use the supplied screws to attach the
mounting ring to the wall.
5. Plug the Ethernet cable into the LAN
port on the access point.
6. To attach the access point to the
mounting bracket.
dlink.com/support
5
Advertisement
