Setting The Initial Magnification Ratio And Position - Canon EOS RP Instruction Manual

Setting the Initial Magnification Ratio and
Position
You can set the initial magnification ratio and position for the magnified view.
1x (no magnification)
z
The image is not magnified. The magnified view will start with the single-
image display.
2x, 4x, 8x, 10x (magnify from center)
z
The magnified view starts at the image center at the selected
magnification.
Actual size (from selected point)
z
The recorded image's pixels will be displayed at approx. 100%. The
magnified view starts at the AF point that achieved focus. If the photo is
taken with manual focus, the magnified view starts at the image center.
Same as last magnification (from center)
z
The magnification will be the same as the last time you exited the
magnified view with the < u > button. The magnified view starts at the
image center.
The magnified view may extend from the center of images even if [Actual size
o
(from selected pt)] is set.
1
Select [3: Magnificatn (apx)].
2
Select an item.
355