Table of Contents
Advertisement
1.3 Hardware Description and Features
Wireless Observer
1
2
Wireless Observer - Connections
1
Network Activity LED
External Microphone
2
Connection Port
3
Motion Sensor Jack
External Power
4
Connector
RJ-45 Ethernet Port
5
(Observer only)
Serial Port
6
(Wireless Observer)
Antenna
Lens
VGA CCD sensor with
fixed focus lens.
Microphone
Monitor or record
sound using the built-
in microphone.
Power Button
Turn the camera on or off. When
the power button is held down
while the camera is on for 6
seconds the camera settings will
reset to the factory defaults.
The power button light will blink
when video is being streamed.
6
3
4
The green LED indicates if there is a connection to your network. If there is
network activity, the green LED will blink.
Connect a standard 1/8" (3.5 mm) computer microphone into this port to
monitor/record audio further away. (External microphone not included)
Connect an external motion sensor to trigger email alerts with images attached.
See the motion detection section for more information. (Optional)
Connect the included power supply.
supply or you may damage your camera.
Used to connect the Observer to your LAN using the included Ethernet cable.
Used to configure your wireless settings using the included serial cable.
Page 7 of 69
1
5
4
Observer - Connections
Warning:
Use only the included power
Observer
2
3
Advertisement
Table of Contents
