Veo Capture 1300 Getting Started page 36

Camera-to-Computer Connection
Caution: It is important to install your camera software before
connecting the cable. Please insert your Veo Capture 1300 Digital
Camera CD-ROM into the CD-ROM drive of your computer and
follow the instructions on the screen to complete the installation.
1. Turn on the camera.
2. Connect the USB cable to any available USB port on your
computer.
3. Connect the other end of the cable to the camera as shown below.
Note: When the USB cable is connected to the computer, all buttons on
the camera are disabled, except the power on/off button.
36