Ashly mXa-1502 Operating Manual page 29

mXa-1502 • Operating Manual
6.3c Settings > Panels > Front Button Settings
6.3d Settings > Panels > Rear Panel
Ashly AquaControl™ Software
• Select Mode: Front panel
buttons A-D can be
configured as a group to:
None (default), Source
Select, Preset Recall, Sub-
Preset Recall.
• Presets/Sub-presets are
chosen from drop down list.
• Source Select: each button
can select one exclusive
input to any mixer.
• Set +48V phantom power
On/Off, mic preamp gain
from 0dB to 66dB, view
mic input signal level
• VCA Inputs (1-3): Shows
current control position
• Trigger 1-8 status, press
the [Edit] button in the
Triggers section to view all
current trigger events
• Output mode as set from
rear panel DIP switches to
Low-Z, 25V, 70V, or 100V
• Bridge mode: Enabled,
disabled (default)
• Standby pin polarity:
Trigger on high, or trigger
on low (default)
• GPO 1-2 pins: Set/display
current GPO pin status
29