Deflection Adjustment - Sony Trinitron KV-XR29M80 Service Manual

7. Copy PMAX data to TV models.
8. Select "WIDE" mode for TV & Video mode, Write the
PMAX Data – 6 steps" (for model with V-Compression
features only).
9. Set the PWL & BLBG back to (PWL: 01h and
BLBG: 00h)

3-4. DEFLECTION ADJUSTMENT

H-TRAPEZOID ADJUSTMENT
1. Receive cross hatch/dot signal
2. Adjust RV1801 on C-Board to make H-Trapezoid
distortion best.
NORMAL MODE (50Hz)
1. Set to Service Mode.
2. Input SPCB Signal (For NTSC models select Video
mode)
3. Using the and buttons select, category GEOM
1 4
(service mode) Raise/lower data using the
buttons to adjust the following items:-
Service Item
GEOM: 000 HPOS
001 HPAR
002 HBOW
003 VLIN
004 VSCR
005 HSIZ
006 EWPW
007 UCOP
008 LCOP
009 EWTZ
010 VSLP
011 VSIZ
012 SCOR
013 VPOS
014 HBL
015 WBF
016 WBR
017 SBL
018 COPY
4. For Korea models only:
a) For GEOM items, copy adjusted 60Hz to 50Hz
b) Add 6 steps to 50Hz "HPOS" item and save data.
c) Add 3 steps to 50Hz "HSIZ" item and save data.
and
3 6
HORIZONTAL SHIFT (HS)
HORIZONTAL
PARALLELOGRAM
HORIZONTAL BOW
VERTICAL LINEARITY
VERTICAL SCROLL
EW WIDTH (EW)
EW PARABOLA/WIDTH
(PW)
EW UPPER CORNER
PARABOLA
EW LOWER CORNER
PARABOLA
EW TRAPEZIUM
VERTICAL SLOPE (VS)
VERTICAL AMPLITUDE
S-CORRECTION (SC)
VERTICAL SHIFT (VSH)
RGB BLANKING MODE
TIMING OF WIDE
BLANKING (WBF)
TIMING OF WIDE
BLANKING (WBR)
SERVICE BLANKING
COPY THE GEO DATA TO
ALL 50/60Hz NVM AREA
– 31 –
WIDE MODE (50Hz)
(V-Compression Adjustment)
1. Input SPCB signal(For NTSC models select Video
mode)
2. Adjust condition to WIDE MODE : ON.
3. Copy (item from NORMAL MODE (50Hz) adjusted
data for the following items:
Service Item
GEOM: 003 VLIN
005 HSIZ
011 VSIZ
012 SCOR
4. Raise/lower data using the
and adjust the following item to obtain optimum image.
Service Item
GEOM: 000 HPOS
001 HPAR
002 HBOW
004 VSCR
006 EWPW
007 UCOP
008 LCOP
009 EWTZ
010 VSLP
013 VPOS
014 HBL
015 WBF
016 WBR
017 SBL
018 COPY
5. For Korea models only:
a) Copy adjusted 60Hz data to 50Hz
b) Add 6 steps to 50Hz "HPS" item and save data.
NORMAL MODE (60Hz)
1. Input 525/60Hz signal.
2. Using the and buttons select category GEOM
1 4
(Service Mode.)
3. Raise/ lower data using the
optimum image
KV-XR29M80
RM-W104
VERTICAL LINEARITY
EW WIDTH (EW)
VERTICAL AMPLITUDE
S-CORRECTION (SC)
and buttons, select
3 6
HORIZONTAL SHIFT (HS)
HORIZONTAL
PARALLELOGRAM
HORIZONTAL BOW
VERTICAL SCROLL
EW PARABOLA/WIDTH (PW)
EW UPPER CORNER
PARABOLA
EW LOWER CORNER
PARABOLA
EW TRAPEZIUM
VERTICAL SLOPE (VS)
PARALLELOGRAM
VERTICAL SHIFT (VSH)
RGB BLANKING MODE
TIMING OF WIDE
BLANKING (WBF)
TIMING OF WIDE
BLANKING (WBR)
SERVICE BLANKING
COPY THE GEO DATA TO
ALL 50/60Hz NVM AREA
and buttons to obtain
3 6