Adjustment Method - Sony Trinitron KV-XR29M80 Service Manual

KV-XR29M80
RM-W104
e. OTHER FUNCTION VIA REMOTE COMMANDER
7, -
All the data becomes the values in memory.
8, -
All user control goes to the standard state.
[Display], - Service data initialization (Be sure not to use usually.)
2, 5 Select Device or Category (Up, Down)

3-2. ADJUSTMENT METHOD

Item Number 000 HPOS
This explanation uses H POSITION as an example.
1. Select "000 HPOS" with the
2. Raise/lower the data with the
3. Select the optimum state. (The standard is IF for PAL reception.)
4. Write with the [MUTING] button. (The display changes to WRITE.)
5. Execute the writing with the
SERVICE.)
Example on screen display :-
GEOM 00
637S 1.0C
GEOM 00
637S 1.0C
GEOM 00
637S
Use the same method for all Items. Use
[MUTING], then execute the write with
Note : 1. In [WRITE], the data for all items are written into memory together.
2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective
input signal after adjustment.
and buttons, or
1 4
and buttons.
3 6
button. (The WRITE display will be changed to red color while excuting, and back to
-
HPS 1F SERVICE
59 7F 0
HPS 1F WRITE
59 7F 0
Write with [MUTING]
WRITE
HPS 1F
1.0C
59 7F 0
Write executed with
and to select the adjustment item, use
1 4
.
-
and .
2 5
50
GREEN
Adjusted with 3
000A
and 6 buttons.
50
GREEN
000A
50
RED
The WRITE display
000A
then the display
returns to green
SERVICE.
– 14 –
and to adjust, write with
3 6