Daikin D Series Service Manual page 89

Instructions
To set the clock
1. Press "CLOCK button".
"
" " blinks.
2. Press "TIMER setting button"
to set the clock to the present
time.
Holding down "
idly increases or decreases the time dis-
play.
3. Press "CLOCK button".
" " blinks.
Turn the breaker ON
• Turning ON the breaker opens the flap,
then closes it again. (This is a normal
procedure.)
NOTE
Tips for saving energy
• Be careful not to cool the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling effect.
• Clogged air filters cause inefficient operation and waste energy. Clean them
once in about every two weeks.
Please note
• The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker
OFF.
• Use the air conditioner in the following conditions.
Mode
COOL
DRY
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
10
80
" is displayed.
" or " " button rap-
Operating conditions
Outdoor temperature: 20 to 46 ˚C
Indoor temperature: 18 to 32 ˚C
Indoor humidity: 80% max.
Outdoor temperature: 20 to 46 ˚C
Indoor temperature: 18 to 32 ˚C
Indoor humidity: 80% max.
C
TEMP
POWERFUL
MODE FAN
ON
OFF
TIMER
Recommended temperature setting
For cooling:26˚C – 28˚C
If operation is continued out of this range
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
ON/OFF
SWING
2
CANCEL
1, 3
System Configuration
Si01-501