Walk-Behind Trowels
4.10
Optional Weights
Background
Wacker Neuson supplies weight kits in order to add weights to the trowel guard
rings to increase the burnishing force.
Procedure
Perform the following procedure to add weights to the trowel.
1. Place an equal number of weights in both the front and rear of the guard ring in
the designated area.
2. Tighten the screw to keep weights in place.
WARNING
Personal injury hazard. Using weights not authorized by Wacker Neuson could
lead to personal injury or machine damage.
► Do not use any object as additional weight other than the weights
recommended by Wacker Neuson.
4.11
Before Starting the Machine
Before starting the machine, perform each item on the following checklist.
Pre-operation
Read and understand the engine owner's manual.
checks
Review and follow the safety instructions found in the front of this Operator's
Manual.
Know the label locations and meanings.
External
Make sure the motor box, switch box, and terminal box covers are tight.
checks
Check the condition of the trowel arms and blades.
Check the condition of the ring guard.
Check that the handle height suits the operator.
Make sure the adjustable lever is tight.
Check the condition of the fuel lines.
Internal
Check oil level in the gearbox.
checks
Check oil level in the engine.
Check fuel level.
Check the condition of the air filter.
wc_tx004127gb_FM10.fm
37
Operation