Remove all the parts from the rear axle (10)
1. Insert the rear axle (10) into the hole near the rear vehicle.
Driving Wheel
3
8
24
1. Slide the gear box (1) onto the rear axle (10). "
the "R" side of the vehicle body; "L" labeled gear box should be fit to the "L" side of vehicle
. Push the gear box (1) and connector on the gear box through the large hole
body
on the rear vehicle and out where the battery sits.
2. Slide the driving wheel (2) onto the rear axle. And keep the driving wheel (2)
match with the gear box (1).
3. Slide the Ø12 washer (3) onto the rear axle (10).
4. Tighten a lock nut (24) to the end of the rear axle (10) with a spanner.
- Repeat the above procedure to assemble the other driving wheel. -
5. Fit the hubcaps (8) to the wheel cover.
Attach the Rear Axle
Attach the Rear Wheels
12
1
2
R" labeled gear box should be fit to
Rear axle (10)