Monessen Hearth NBST27NV-B Installation & Owner's Manual page 20

Continue on Side B, valve on right as you face the
fireplace.
6. Place log #6 on pilot end of burner by aligning the 'V'
notch in bottom of log with the filler bracket surround-
ing the pilot. Place the rectangular notch in the bottom
of the log onto the rectangular protrusion on the end of
log #1. Figure 5.6
Log #6
Figure 5.6 - Place Log #6
7. Place log #7 on left two (2) grate tines by aligning the
LG655
'V' notch in log with grate tines. Make sure groove on
NBST log 6
bottom of log is firmly seated on grate bar. Figure 5.7
Figure 5.7 - Place Log #7
8. Place log #8 by aligning 'V' notch in bottom of log with
LG656
the horizontal grate bar between tines as shown in Fig-
NBST log 7
ure 24. Place the rectangular notch on bottom of log
onto rectangular protrusion on middle of log #1. Figure
5.8
20 Monessen • NBST27-B Gas Log Set Owner's /Installation Manual • 4615-900 Rev. D • 01/2020
Log #1
Control Valve
Log #7
Figure 5.8 - Place Log #8
LG657
NBST Log 8
9. Place log #9 on farthest right grate tine by aligning 'V'
notch in bottom of log with grate tine. Place rectangu-
lar notch in bottom of log onto rectangular protrusion
on log #8. Figure 5.9
Figure 5.9 - Place Log #9
LG658
NBST log 9
10. Place log #10 by aligning two (2) rectangular notches
on bottom of log with rectangular protrusions on logs
#6 & #7. Make sure the ember or 'burnt' area of log is
facing center of burner. Figure 5.10
Log #10
Figure 5.10 - Place Log #10
Log #8
Log #9
LG659
NBST Log 10