Philips 8FF3WMI Firmware Upgrade Instructions
Hide thumbs
Also See for 8FF3WMI:
- User manual (53 pages) ,
- Specifications (3 pages) ,
- Firmware upgrade instructions (1 page)
Advertisement
Quick Links
PhotoFrame Firmware Upgrade Instructions
Applicable models
Firmware version
Release date
Release notes
Please follow the steps below to upgrade the PhotoFrame firmware.
1
Format a SD (Secure Digital) card
2
Copy all files from the 'Firmware' folder into the root folder of the storage device
(The root folder is the 'highest' folder in hierarchy, for example F:\)
3
Insert SD into PhotoFrame
4
Go to the Main Menu, [New Update] is highlighted
5
Press OK to initiate the upgrade
8FF3WMI
1.01
September 19, 2008
Advertisement
Related Manuals for Philips 8FF3WMI
Summary of Contents for Philips 8FF3WMI
- Page 1 PhotoFrame Firmware Upgrade Instructions Applicable models 8FF3WMI Firmware version 1.01 Release date September 19, 2008 Release notes Please follow the steps below to upgrade the PhotoFrame firmware. Format a SD (Secure Digital) card Copy all files from the ‘Firmware’ folder into the root folder of the storage device (The root folder is the ‘highest’...
- Page 2 When the confirmation message is displayed, select [Yes], then press OK Warning: Upgrade takes about 1 minute. During the upgrade do not disconnect power, remove the memory or make new connections. Otherwise this may harm your PhotoFrame. When the update is complete, the PhotoFrame reboots. You can check the new firmware version via: Settings Status...