KTM 50 SX Setup Instructions page 14

3 WORK
3.14
12
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
E00747-01
Preparatory work
–
Remove the seat. ( p. 6)
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Remove the fuel tank. (
Main work
–
Check the throttle cable routing.
The throttle cable must be routed to the carburetor behind
the handlebars and above the fuel tank bracket.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 8)
–
Mount the seat. ( p. 6)
p. 7)