Updating The Firmware Of The Products - Sennheiser EPOS ADAPT 460 User Manual

25 Maintaining the products and updating the firmware

Updating the firmware of the products

To update the installed firmware:
Install the free of charge
X
Updating the firmware of the headset
1
Pull carefully on the cover of the USB socket.
X
3
EPOS Connect
Updating the firmware of the dongle
1
Plug the dongle into the USB port of your computer.
X
The LED lights up.
ADAPT 460 | ADAPT 460T
EPOS Connect software (see page 10).
x
USB-C
USB-A
Bluetooth headset
®
2
USB-A
Connect the USB cable to your headset and your
X
computer.
The LED lights up.
Start EPOS Connect.
X
If there is a new firmware available the software will
guide you through the update process.
2
EPOS Connect
Start EPOS Connect.
X
If there is a new firmware available the software will
guide you through the update process.
x