Displaying Your Phone Number; Making And Answering Calls; Making Calls; Dialing Options - Sprint CDM-105 Phone Manual

Displaying Your Phone Number

Just in case you forget your phone number, your Sprint PCS
Phone can remind you.
To display your phone number:
Press Menu (
) to access the main menu, select
Settings ( ), Phone Info (
( ). (Your phone number and other information
about your phone and account will be displayed.)

Making and Answering Calls

Making Calls

Placing a call from your Sprint PCS Phone is as easy as
making a call from any land line phone. Just enter the
number and press and you're on your way to clear calls.
To make a call using your keypad:
1.
Make sure your phone is on.
2.
Enter a phone number from standby mode. (If you
make a mistake while dialing, press
digit at a time. Press and hold
number.)
3. Press . (To make a call when you are roaming and
Call Guard is enabled, highlight Roam Call and press
. See "Call Guard" on page 74.)
4.
Press or close the phone when you are finished.
Tip: To redial your last outgoing call, press
off the Nationwide Sprint PCS Network, always dial using 11 digits
(1 + area code + phone number).
26 Section 2A: Your Sprint PCS Phone – The Basics
) and Phone Number
to erase one
to erase the entire
twice. When making calls
You can also place calls from your Sprint PCS Phone by
using Sprint PCS Voice Command
Dialing numbers from your Phone Book (page 37), and
using your Call History listings (page 82).

Dialing Options

When you enter numbers in standby mode, you will see a
variety of dialing options appear as softkeys on the phone's
display screen.
To initiate an option, press the corresponding softkey
button.
Speed Dial: Enter a number (1-500) to display the entry
contained in the speed dial location you entered
(if applicable). Press
Tip:
To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (If the speed dial number is
three digits, enter the first and second digits, then press and hold the third
digit.) (This feature will not work when you are roaming off the Nationwide
Sprint PCS Network; when roaming you must dial using eleven digits [1 +
the area code + the seven-digit phone number].)
Save: Enter a seven or ten digit number (phone number
and area code) and press Save (
number in your Phone Book. (See "Saving a Phone
Number" on page 31.)
Find: Enter a digit or string of digits and press Option
). Select Find and press Select (
(
Phone Book entries that contain the entered numbers.
(See "Finding a Phone Number" on page 33.)
Section 2A: Your Sprint PCS Phone – The Basics
SM (page 145), Speed
to dial the speed dial number.
) to save the phone
) to display
27