Solid-State Drive Specifications - HP mt22 Maintenance And Service Manual

Solid-state drive specifications

Table 12-3 Solid-state drive specifications
Height
Length
Width
Weight
Transfer rate
Sequential read
Random read
Sequential write
Random write
Interface type
Ready time, maximum (to not busy)
Access times, logical
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may
differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
84 Chapter 12 Specifications
128 GB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
up to 2150 MB/s
Up to 300,000 IOPs
up to 1260 MB/s
Up to 100,000 IOPs
SATA-3
1.0 ms
0.1 ms
234,441,648
0°C to 70°C (32°F to 158°F)