Recommendations
for users
Warranty
HI99300
against defects in workmanship and materials when
used for their intended purpose and maintained
according to instructions. Electrodes and probes are
warranted for a period of six months. This warranty
is limited to repair or replacement free of charge.
Damage due to accidents, misuse, tampering or
lack of prescribed maintenance is not covered.
If service is required, contact your local Hanna
Instruments Office. If under warranty, report the
model number, date of purchase, serial number
(see engraved on the back of the meter) and the
nature of the problem. If the repair is not covered
by the warranty, you will be notified of the
charges incurred. If the meter is to be returned to
Hanna Instruments, first obtain a Returned Goods
Authorization number from the Technical Service
department and then send it with shipping costs
prepaid. When shipping any meter, make sure it is
properly packed for complete protection.
Hanna Instruments reserves the right to modify the design,
construction or appearance of its products without advance notice.
Before using this product, make sure
it is entirely suitable for your specific
application and for the environment
in which it is used. Any variation
introduced by the user to the supplied
equipment may degrade the meter's
performance. For yours and the meter's
safety do not use or store the meter in
hazardous environments.
and
HI99301
are warranted for two years