Shure Incorporated
Using Autofocus to Improve Coverage
This microphone uses built-in Autofocus technology to fine-tune each lobe's position in real time, even if meeting participants
lean back or stand up. You'll see the lobes moving in Designer's coverage map as participants shift positions. Autofocus only
responds to in-room sound sources.
For best results with Autofocus, always route a reference source to the microphone's AEC Reference In channel. Even if you're
only using direct outputs from the microphone and a different DSP, route a reference signal to the microphone's AEC Refer
ence In channel to take full advantage of Autofocus.
20/37