Table of Contents
Advertisement
• Follow instructions for wheel assem-
bly installation. Improper installation
may result in property damage and/or
serious injury.
• Always use appropriate personal pro-
tective equipment when handling and
using equipment in drains. Wear ap-
propriate protective equipment such as
latex or rubber gloves, goggles, face
shields, and respirators when inspect-
ing drains that might contain hazard-
ous chemicals or bacteria. Always wear
eye protection to protect against dirt and
other foreign objects.
10 – English – SeeSnake Standard
Assembly
Installing the Wheels
WARNING
Installing the wheels incorrectly may re-
sult in property damage and/or serious
injury.
Wheels
Domed
Endcap
Rigid
Tube
Axle
1. Slide wheel onto axle and seat
against foot.
2. Place rigid tube between the two axle
hubs. Frame may need to be flexed
slightly.
3. Slide axle through tube. The rubber
foot on the axle should be on the
same side of the frame as the two
rubber feet on the frame.
4. Place second wheel on axle.
5. Insert the slotted screw through
domed endcap and into end of axle.
Ensure slots on screw are aligned
with the endcap and axle.
Slotted
Screw
Rubber Foot
Advertisement
Table of Contents
