DAP-1155 Wireless N150 Access Point & Router
User Manual
PPPoE + Static IP Connection
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection
section, page 79).
Click the Next button to continue.
Figure 28. Configuring PPPoE + Static IP WAN connection.
Page 40 of 158
Configuring Device