Canon imagePRESS C800 Series Technical & Service Manual page 35

Local access to settings of the Settings Editor
The Settings Editor application on the PRISMAsync controller is a web based application that
allows key operators and system administrators to adapt the system completely to the situation
in an organisation and production environment. The Settings Editor allows key operators and
system administrators to manage settings with regard to network configuration, system
preferences, job preferences and media.
For convenience reasons, a subset of frequently used settings is accessible through the operator
panel.
NOTE
You need the Key operator, Service or the System Administrator password to make changes in
this section.
1. About
• [Serial number] (read only)
• [Version of printer software] (read only)
• [Upgrade software (from USB)]
With this option you can install a patch on the PRISMAsync controller.
• Upgrade software (from server)
With this option you can install a patch that is stored on a remote server. If there is a patch
available it will be downloaded and installed
2. Software licenses
• [Upload] license
When you have a new license to activate a new feature on the printer, you can upload the
license file through this section. After uploading the license file, the feature becomes active
3. [Logging]
• [Save the datadump file]
When an error occurs, you can create a datadump file. The datadump file is a .zip file that
contains detailed technical information about the [System].
• [Save the trace file]
The [System] can also store trace log files in .zip files. These contain an even more detailed
and technical description of occurrences in the [System].
• [Print the configuration report]
The configuration report contains information about the configuration of your printing
[System], for example information about the [System] configuration, controller
configuration or network settings.
4. [Connectivity]
The [Connectivity] section contains the main settings to integrate the printer into a network.
After you adapted the network settings, you can test the connection from here. A more
detailed description of the settings can be found in the Settings Editor Document.
• [MAC address] (read-only)
• [Host name]
• [Link speed and connection type]
• [Primary DNS suffix]
• [DNS suffix follows domain]
• [Test the TCP/IP connection]
• [DHCP enabled]
• [TCP/IP address]
• [Subnet mask]
• [Default gateway]
• DNS 1
• DNS 2
• WINS 1
• WINS 2
Chapter 4 - Using the PRISMAsync
System settings
35