Table of Contents
Advertisement
1. Accessory parts
No.
Name
1. Stamp unit
2. Stamp
3. Installation
manual
Keep this bag away from babies and
children. Do not use in cribs, beds,
carriages, or playpens.
The thin film may cling to nose and
mouth and prevent breathing. This bag is
not a toy.
2. Installation procedures
(1) Turn off the machine and unplug the power cord
from the power outlet.
(2) Raise the dual scan document feeder.
(3) To detach the left side of the document pad from
the feeder, separate the two faces of the hook-
and-loop fastener (at two places on the left).
Note:
When removing the document pad, pull apart the
hook and loop fastener one by one. Pulling the
mall at once may damage the sponge.
SP-501
INSTALLATION MANUAL
Shape
Q'ty
1
1
1 set
Stamp Unit
(4) Remove the cover shown in the illustration.
(Two screws)
(5) Remove the ground terminal. (One screw)
(6) Remove the connector fastened to the guide
plate.
(7) Remove the guide plate. (One screw)
E-11
Hide quick links:
Advertisement
Table of Contents
