The Notebook Does Not React; The Lcd Screen Of The Notebook Remains Blank; The Lcd Screen Is Difficult To Read - Fujitsu Siemens AMILO Pro answers 2 Getting Started

The notebook does not react

If the notebook does not react and cannot be switched off with the suspend/resume button, you can
reset it with the Reset switch.
► Press a pen or a piece of wire (e.g. a paperclip) firmly into the opening (1).
► Switch the notebook on.

The LCD screen of the notebook remains blank

If your LCD screen remains blank this may be due to the following:
LCD screen is switched off
► Press a key or enter the password
External monitor or television set connected
► In BIOS-Setup in the Advanced - Video Features menu set the Display Settings setting to Internal
Flat Panel .
The notebook has been configured to drive the external monitor
► Press the key combination Fn + F10 until you find the display option you require.

The LCD screen is difficult to read

If the LCD screen display is hard to read, it can be due to the following:
Reflection
► Turn the notebook or alter the tilt of the LCD screen.
Brightness control is set to dark
► Set the brightness control of the LCD screen to bright.
A26391-K149-Z100-1-7619, Edition 2
1
AMILO Pro
19