HEATING SPECIFICATIONS
1
Heat Output
2
Heating Capacity
3
Fuel Burn Rate
Burn Time (lowest setting)
Hopper Capacity
1
BTU output will vary depending on the quality of fuel. Use PFI listed fuels for the best results.
2
Heating capacity will vary depending on floor plan layout of your home, degree of insulation, and the outside temperature.
3
Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best re-
sults.
DIMENSIONS
Height
Width
Depth
Weight (empty)
ELECTRICAL SPECIFICATIONS
Electrical Rating
Watts (operational)
Watts (igniter running)
FUEL CONSIDERATIONS
Ashley Heritage Model 5700
Your
tion of Pellet Fuel Industries standards. (Minimum of 40 lbs density per cubic ft, 1/4" to 5/16" diameter, length no
greater than 1.5", not less than 8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt un-
der 300 parts per million). Pellets that are soft, contain excessive amounts of loose sawdust, have been, or are wet,
will result in reduced performance.
SAFETY AND EPA COMPLIANCE
Ashley Heritage Model 5700
Your
exempt from EPA Phase II requirements by OMNI-Test Laboratories, Inc. Beaverton, Oregon, USA.
SPECIFICATIONS
38,000 BTU/hr
800 – 2,000 sq ft
1.5 – 4.7 lbs/hr
24 hrs
50 lbs
38 3/4 in
24 1/4 in
25 3/4 in
280 lbs
110-120 volts 60 HZ 3.0 amps
175 (approximately)
425 (approximately)
stove is designed to burn premium hardwood pellets that comply with Associa-
stove has been safety tested and listed to ASTM E 1509, (UM) 84-HUD, and is
-5-