Installing Lp Gas Tank - Charmglow 82300 Owner's Manual

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
5
Attach Dome
B
x 3
6
Attach Dome Cap and Finial

Installing LP Gas Tank

To operate you will need (1) precision-filled standard grill LP gas tank (20 lb.)
with external valve threads or (1) 14.1 oz or (1) 16.4 oz LP gas tank.
Note: An empty standard grill LP gas tank weighs approximately 18 lbs. A
precision-filled standard grill LP gas tank should weigh no more than 38 lbs.
Insert and Secure (1) 14.1 oz or (1) 16.4 oz LP Gas
Tank
Only cylinders marked "propane" may be used.
Note: Some 1-lb cylinders may form frost when near empty.
Line up threads on canister with those on regulator, insert
and rotate canister clockwise until they fit snugly together.
HAND TIGHTEN ONLY. Be careful not to cross threads when
screwing in canister.
Disconnect (1) 14.1 oz or (1) 16.4 oz LP
Gas Tank
Before disconnecting make sure the heater control valve is
"OFF".
Rotate LP gas tank counterclockwise until it is loose.
Store the LP gas tank in a proper location.
Need a tank of gas? Try tank exchange service. It's easy, fast, safe,
and available at tens of thousands of conveniently located retail outlets
nationwide. You can purchase a new full tank or exchange your empty
for a precision filled one.
page no.
5