The Machine Shut Off While Sewing; How To Resume The Data; The Bobbin Winder Spindle Got Tangled When Winding The Bobbin - ELNA Air Artist Faq

Machine
F A Q
10
Q15

The machine shut off while sewing.

A15
You can resume the sewing. Turn the power switch on and connect the embroi-
dery machine and device.

How to resume the data

Remove the hoop from the machine. Cut the thread close to the fabric
(Do not remove the fabric from the hoop).
Initialize the embroidery machine.
Restart the app.
Connect the embroidery machine to the device.
Recover the data.
Set the hoop to the embroidery machine.
Press the stitch back button (-) to move to the hoop position
10 stitches.
Hold the loose end of the thread lightly and restart sewing.
Q16
The device cannot access to the embroidery machine after switching the
access point mode and client mode.
A16
The previous wireless LAN settings on your device will not be registered when
switching the connection mode. Re-establish the connection between the
wireless LAN router and your device when switching from the access point
mode to the client mode. See A1 and A2.
Q17

The bobbin winder spindle got tangled when winding the bobbin.

A17
Cut the thread and remove the
bobbin. Remove all tangled threads
from the bobbin winder spindle. Use
tweezers for easier removal.
Align the projection on the bob-
bin winder spindle and the slit of
the bobbin.
Put the bobbin on the bobbin
winder spindle.
Be sure that the bobbin snaps into
the place.