System Setup - Fender Passport Event Series 2 Owner's Manual

Congratulations on purchasing a Fender® Passport Event Series 2
audio system—a self-contained portable audio system designed for
great sound anywhere. Carry Passport like a suitcase, and simply flip
open the cabinet-release latches to access two full-range speaker
cabinets, a powered mixer, and power and speaker cables.
Use Passport as a public address system or to amplify musical
instruments and vocals. Connect mobile devices for easy
accompaniment, including Bluetooth pairing. Passport's quick
and easy setup, its ability to cover large audiences and its simple
1. OPEN: Flip open cabinet latches on top of Passport
and detach speaker cabinets from powered
mixer section:
3. SPEAKER CABLE/POWER CORD STORAGE: Open storage
compartment on rear of mixer and remove power cord and
speaker cables:
PASSPORT EVENT SERIES 2
®

SYSTEM SETUP

1
operation are the hallmarks of this innovative product. Its control
panel features mono mic/line channels and stereo line channels
with a variety of input jacks to provide superb connectivity
flexibility.
Register your Passport Event Series 2 online at start.fender.com.
2. PLACEMENT: For optimal results, elevate speaker cabinets on
Passport speaker stands or sturdy tables. Place the speakers far
apart to maximize stereo separation. Position mixer close by
for easy access to control panel:
4. POWER CORD/SPEAKER CABLE CONNECTION: Plug
speaker cables into left and right speaker jacks on back of
the mixer (upper right arrow), then connect corresponding
left and right speakers. Make sure power switch is off before
connecting power cord (included) into power inlet on back of
mixer (lower left arrow); plug other end into a grounded AC
power outlet: