Area Of Use; Mechanical Installation; Drive Exterior And Mounting Dimensions (Ip20) - YASKAWA GA800 600 V Drive Installation & Primary Operation

Item
• UL 508C
Standard
IP20/UL Open Type
IP55/UL Type 12 Heatsink External Mounting
Protection Design
Note:
To change an IP20/UL Open Type drive to an IP20/UL Type 1 drive, install a UL Type 1 kit.
◆

Area of Use

Install this product in a location with Overvoltage Category III and pollution degree 2 or less as specified in UL 508C.
■
Ambient Temperature Setting
Maintain the ambient temperature within the following ranges according to the enclosure type.
• IP20/UL Open Type/Heatsink External Mounting: -10 °C to +50 °C (14 °F to 122 °F)
• IP55/UL Type 12 Heatsink External Mounting; front side: -10°C to +50 °C (14 °F to 122 °F)
• IP55/UL Type 12 Heatsink External Mounting; back side: -10°C to +40 °C (14 °F to 104 °F)
6

Mechanical Installation

This section gives information about the standard environment for correct installation.
◆

Drive Exterior and Mounting Dimensions (IP20)

For additional IP20 drive dimension information, refer to the Technical Reference manual (document number
SIEPC7106170V).
For IP55/UL Type 12 Heatsink External Mounting dimension information, refer to the Installation Manual (document
number TOEPC71061779) and the Quick Setup Procedures (document numbers TOEPC71061780 and
TOEPC71061781).
For dimensions and installation instructions for other external heatsink installations, refer to the External Heatsink
Installation Kit Instruction Manual (document number TOEPC72060003).
For product weights, refer to the drive nameplate.
YASKAWA TOEPC7106170VA GA800 600 V Drive Installation & Primary Operation
Table 5.4 Standard
Specification
6 Mechanical Installation
13