Basic.setup; Activating Autotalk - Uniden XS1455/1455+1 Owner's Manual

Basic.Setup

There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Name Tag and
Insert 0. All options are available on the XS455 handset. For the XS455+ the options are available as follows.
CIDCW option can only be set by using Handset . If you try to set by using Handset 2 (XS455+
only), you will not see these options listed on the LCD screen. (On XS455+, Handset  shows in
the display while the phone is charging.)
AutoTalk, Name Tag and Insert 0 options can be set by using either Handset  or Handset 2
(XS455+ only).
Activating.AutoTalk
AutoTalk will allow you to answer the phone simply by removing the handset from the cradle. You do not have to
press a key to answer the incoming call.
To activate:
) When the phone is in standby, press and hold [cid/menu]. The following screen appears.
2) Press [select/channel] key (XS455+) or [select/remote] key (XS455) to turn
AutoTalk on.
3) Press [end] or return the handset to the charging cradle to complete the setting. The handset returns to standby.
5
XS1455+1 OM.indd 15 24/6/08 1:36:05 PM