3) Make sure that the charge/in.use LED and
illuminate. If the LED does not illuminate, check to see that the AC
adapter is plugged in and that the handset makes good contact with the
cradle's charging contacts.
Note:.
•..Connect.the.AC.adapter.to.a.continuous.power.supply..
•..Place.each.cradle.close.to.the.AC.outlet.to.avoid.long.
extension.cords.
•. Charge.your.handsets.at.least.15.-.20.hours.before.plugging.
into.the.phone.line..
4) Once the handset battery packs are fully charged, connect the telephone
cord to the TEL.LINE jack and a telephone outlet. If your telephone outlet
isn't modular, contact your telephone company for assistance.
XS1455+1 OM.indd 10
LED (XS455+ only)
0
24/6/08 1:36:00 PM